Tagsurance 2.7 Software Download Page
Tagsurance 2.7.0 Software Package [ 1028 MB ]
Multilane Plugin v.1.1.0 [445 KB]
Date published: May 20th, 2024
Extract the zip and run Tagsurance 2.7.0/setup.exe to install the software
No firmware updates needed when updating from version 2.6.4
Download the latest Tagsurance 2 Manual (Sep-2024) here. This update contains the EXTIO signaling for Tagsurance HF 3.0
Release Notes
- Support added for Tagsurance HF 3.0 tester hardware – no new features
- The features are identical for all Tagsurance HF tester hardware versions (1.0 / 2.0 / 3.0)
Contents of the package
- Tagsurance 2 Installer
- Tagsurance 2 GUI 2.7
- Tagsurance Manual 5/2024
- Tagsurance UHF Update Tool 1.6.2
- Tagsurance HF Update Tool 1.3.3
- Tagsurance UHF Firmware 1.9.3
- Tagsurance HF Firmware 2.8.0
- Test Data Analyzer 1.7.3
- FTDI/USB-RS232 adapter drivers (2.12)
Requirements
- Windows 10 PC
- USB 2.0 or RS-232 (serial) -port
Tagsurance Test Data Analyzer
Tagsurance Test Data Analyzer 1.7.3 Installer [ 191 MB ]
Date published: 25-MAY-2020
Requirements
- Windows 10 PC
IO controller
Multilane IO controller v1 installer [ 265 MB ]
Specs:
- can only be used when there is one trigger for all the lanes
- if more than one lane, the lane numbers >1 are triggered “virtually”; first lane has to be triggered twice before the virtual trigger starts working
- marker signal is up as long as the test takes (goes up on Nth trig – configurable offset – and down when the test started on that trig ends)
Printer signalling
- if tag failed the test, print signal is set to float (otherwise grounded) when the Nth tag causes trigger (N is the offset for bad tag marking)
- print signal goes down (is reset) when the test triggered is completed
- for a passed tag the printer signal is kept down