Tagformance Pro UHF 13.3

Tagformance Pro UHF 13.3 Software Package [ 550 MB ]

Please note that if you use both Tagformance UHF and HF, you will need to update HF also to the 3.2.4 version 

Date published: November 14th, 2022

Tagformance 13.3 software requires updating to firmware version 4.0.0 to operate.
New firmware and update tools are included in the installation package.

Please extract the .zip and run setup.exe to install the software.

Contents of the package

  • Tagformance UHF Installer
    • Tagformance 13.3 (v13 license required)
    • Update Tool 1.0.1 (for Tagformance Pro)
    • Tagformance Pro Firmware 4.0.0
    • NI LabVIEW Runtime 2019 SP1 f5 (Full)
    • NI-DAQmx Runtime 21
    • NI system Configuration Runtime 21
  • Tagformance Pro Manual
  • Tagformance Pro Quick Start Guide
  • Tagformance Pro SW-API manual

What’s New

  • New fail-fast mode saves time with TIPP and ARC measurements by skipping tests where a result is not possible
  • ARC test: Y specification added
  • Custom command waveforms: control over timing and modulation depth
  • JSON file format
  • NOTE: Tagformance Pro HF users need to update the software too

Fail-fast Mode Saves Time with TIPP and ARC Measurements

Tagformance 13.3 release introduces a new feature to the Tagged-Item Grading System and ARC Pre-compliance testing. The new “fail-fast” test mode option skips unnecessary tests bound to fail, saving valuable testing time. For example,  when there is an angle where the tag does not reply at all, the rest of the test for the given cell is simply skipped after the first failure. This is particularly useful when testing for all TIPP grade or ARC categories.

The 13.3 version also adds support for the new ARC Y-specification.

Custom Command Waveforms: Control over timing and modulation depth

V13.3 adds new options for custom command waveform generation with control over timings and modulation depth, plus a configuration possibility for ISO18000-6C link parameters. These will add more flexibility for testing and enable new kinds of test scenarios, such as emulating filtered modulation signals.

JSON File Format

The new release also introduces a new result file format that will replace the TFF format in the long term. The new JSON result file is more machine-friendly and allows programmatic post-processing of results, as well as more flexible management of metadata. The old TFF format is still available as a legacy option (import, export), but JSON is the recommended default export format.

*V13.3 requires V13 license. Users with TF12 or older with an active Support & Maintenance contract can request for an updated license via support@voyantic.com. Otherwise contact sales@voyantic.com for assistance.

Earlier Installation Packages

Older versions are available on request from support@voyantic.com.