Tagsurance 2.3 Software Download Page

Tagsurance 2.3 Software Package [ 549 MB ]

Multilane Plugin v.1.1.0 [445 KB]

Date published: February 14th, 2020
MD5: 35544365A9670FC2821C7F61FCFB082C

Extract the zip and run setup.exe to install the software

The firmware has to be updated with the update tool according to the instructions in the Tagsurance 2 manual. Tagsurance 2 Software (v.2.3.0) is compatible with Tagsurance-UHF FW versions 1.9.x.

What’s New in Tagsurance 2?

View Release Notes

Contents of the package

  • Tagsurance 2 Installer
    • Tagsurance 2 GUI 2.3.0
    • Tagsurance Manual 12/2019
    • Tagsurance UHF Firmware 1.9.1
    • Tagsurance UHF Update Tool 1.6.2
    • Tagsurance HF Firmware 1.2.2
    • Tagsurance HF Update Tool 1.2.1
  • Test Data Analyzer 1.7.2
  • FTDI/USB-RS232 adapter drivers

Requirements

  • Windows 7/8/10 PC
  • USB 2.0 or RS-232 (serial) -port

Tagsurance Test Data Analyzer

Tagsurance Test Data Analyzer 1.7.3 Installer [ 188 MB ]

Note: the Test Data Analyzer 1.7.2 included in Tagsurance 2 Software Package v5 has a bug causing loading of certain results to fail, please update to this version for a fix.

Date published: 25-MAY-2020

Requirements

  • Windows 7/8/10 PC

IO controller

Multilane IO controller v1 installer [ 270 MB ]

Specs:

  • can only be used when there is one trigger for all the lanes
  • if more than one lane, the lane numbers >1 are triggered “virtually”; first lane has to be triggered twice before the virtual trigger starts working
  • marker signal is up as long as the test takes (goes up on Nth trig – configurable offset – and down when the test started on that trig ends)

Printer signalling

  • if tag failed the test, print signal is set to float (otherwise grounded) when the Nth tag causes trigger (N is the offset for bad tag marking)
  • print signal goes down (is reset) when the test triggered is completed
  • for a passed tag the printer signal is kept down

Earlier Installation Packages