com.impinj.stp

Class StpApi

java.lang.Object

com.impinj.stp.StpApi

public final class StpApi
extends java.lang.Object

Nested Class Summary

Nested Classes

Modifier and Type	Class and Description
static class	StpApi.AddLicenseKeyCommand Protobuf type Impinj.STP.AddLicenseKeyCommand
static interface	StpApi.AddLicenseKeyCommandOrBuilder
static class	StpApi.AddLicenseKeyResp Protobuf type Impinj.STP.AddLicenseKeyResp
static interface	StpApi.AddLicenseKeyRespOrBuilder
static class	StpApi.AddOrderedListEntriesCommand Protobuf type Impinj.STP.AddOrderedListEntriesCommand Send a list of tag operations to perform.
static interface	StpApi.AddOrderedListEntriesCommandOrBuilder
static class	StpApi.AddOrderedListEntriesResp Protobuf type Impinj.STP.AddOrderedListEntriesResp Returns SUCCESS if the OrderedListEntries_ were added.
static interface	StpApi.AddOrderedListEntriesRespOrBuilder
static class	StpApi.AddSerializationJobCommand Protobuf type Impinj.STP.AddSerializationJobCommand Set the SerializationJob_
static interface	StpApi.AddSerializationJobCommandOrBuilder
static class	StpApi.AddSerializationJobResp Protobuf type Impinj.STP.AddSerializationJobResp See AddSerializationJobCommand_.
static interface	StpApi.AddSerializationJobRespOrBuilder
static class	StpApi.AddTIDTableEntriesCommand Protobuf type Impinj.STP.AddTIDTableEntriesCommand Send a list of tag operations to perform.
static interface	StpApi.AddTIDTableEntriesCommandOrBuilder
static class	StpApi.AddTIDTableEntriesResp Protobuf type Impinj.STP.AddTIDTableEntriesResp Returns SUCCESS if the TID entry was added.
static interface	StpApi.AddTIDTableEntriesRespOrBuilder
static class	StpApi.AntennaConfig Protobuf type Impinj.STP.AntennaConfig An antenna's RF, timing, and Gen 2 behavior parameters.
static interface	StpApi.AntennaConfigOrBuilder
static class	StpApi.AntennasConfig Protobuf type Impinj.STP.AntennasConfig A list of antenna configurations.
static interface	StpApi.AntennasConfigOrBuilder
static class	StpApi.BlockPermalockConfig Protobuf type Impinj.STP.BlockPermalockConfig Gen 2 BlockPermalock command (BlockPtr, BlockRange) on User Memory Bank - Read/Permalock behavior.
static interface	StpApi.BlockPermalockConfigOrBuilder
static class	StpApi.CartonContentsError Protobuf type Impinj.STP.CartonContentsError
static interface	StpApi.CartonContentsErrorOrBuilder
static class	StpApi.CartonContentsErrorType Protobuf enum Impinj.STP.CartonContentsErrorType
static class	StpApi.CartonContentsJob Protobuf type Impinj.STP.CartonContentsJob A Carton contents job is what you use to provide you with an estimate of what tags are in a given carton
static interface	StpApi.CartonContentsJobOrBuilder
static class	StpApi.CartonContentsReport Protobuf type Impinj.STP.CartonContentsReport
static interface	StpApi.CartonContentsReportOrBuilder
static class	StpApi.CartonContentsResult Protobuf enum Impinj.STP.CartonContentsResult
static class	StpApi.CartonContentsTag Protobuf type Impinj.STP.CartonContentsTag
static interface	StpApi.CartonContentsTagOrBuilder
static class	StpApi.Command Protobuf type Impinj.STP.Command From Host to Impinj Device
static interface	StpApi.CommandOrBuilder
static class	StpApi.ConnectCommand Protobuf type Impinj.STP.ConnectCommand Sent on the initial device connection to verify the health of the channel.
static interface	StpApi.ConnectCommandOrBuilder
static class	StpApi.ConnectResp Protobuf type Impinj.STP.ConnectResp Indicates that the connection was successful.
static interface	StpApi.ConnectRespOrBuilder
static class	StpApi.DeviceConfig Protobuf type Impinj.STP.DeviceConfig Defines the behavior of the device.
static interface	StpApi.DeviceConfigOrBuilder
static class	StpApi.DeviceEventConfig Protobuf type Impinj.STP.DeviceEventConfig Enable or disable classes of reports.
static interface	StpApi.DeviceEventConfigOrBuilder
static class	StpApi.DeviceEventReport Protobuf type Impinj.STP.DeviceEventReport
static interface	StpApi.DeviceEventReportOrBuilder
static class	StpApi.DeviceExceptionEvent Protobuf type Impinj.STP.DeviceExceptionEvent **NOT YET SUPPORTED**
static interface	StpApi.DeviceExceptionEventOrBuilder
static class	StpApi.DeviceExceptionEventType Protobuf enum Impinj.STP.DeviceExceptionEventType **NOT YET SUPPORTED**
static class	StpApi.DeviceFaultType Protobuf enum Impinj.STP.DeviceFaultType
static class	StpApi.DeviceMode Protobuf enum Impinj.STP.DeviceMode
static class	StpApi.DeviceOperatingState Protobuf enum Impinj.STP.DeviceOperatingState
static class	StpApi.DeviceState Protobuf type Impinj.STP.DeviceState The health or fault state of the device.
static interface	StpApi.DeviceStateOrBuilder
static class	StpApi.DisengageCommand Protobuf type Impinj.STP.DisengageCommand Called after StopCommand_, return the device to its initial state.
static interface	StpApi.DisengageCommandOrBuilder
static class	StpApi.DisengageResp Protobuf type Impinj.STP.DisengageResp See DisengageCommand_.
static interface	StpApi.DisengageRespOrBuilder
static class	StpApi.EngageCommand Protobuf type Impinj.STP.EngageCommand Tell the device to do any preparation possible before a StartCommand_ is sent so that the operation begins as soon after the start as possible.
static interface	StpApi.EngageCommandOrBuilder
static class	StpApi.EngageResp Protobuf type Impinj.STP.EngageResp See EngageCommand_.
static interface	StpApi.EngageRespOrBuilder
static class	StpApi.EPCMemory Protobuf type Impinj.STP.EPCMemory Describes the EPC memory of a tag.
static interface	StpApi.EPCMemoryOrBuilder
static class	StpApi.ErrorCode Protobuf enum Impinj.STP.ErrorCode
static class	StpApi.Filter Protobuf type Impinj.STP.Filter
static interface	StpApi.FilterOrBuilder
static class	StpApi.Gen2Mode Protobuf enum Impinj.STP.Gen2Mode
static class	StpApi.Gen2Session Protobuf enum Impinj.STP.Gen2Session
static class	StpApi.GetAntennaConfigCommand Protobuf type Impinj.STP.GetAntennaConfigCommand Request the antenna configuration.
static interface	StpApi.GetAntennaConfigCommandOrBuilder
static class	StpApi.GetAntennaConfigResp Protobuf type Impinj.STP.GetAntennaConfigResp Return the configuration which was set on all antennas.
static interface	StpApi.GetAntennaConfigRespOrBuilder
static class	StpApi.GetDeviceConfigCommand Protobuf type Impinj.STP.GetDeviceConfigCommand Get the DeviceConfig_
static interface	StpApi.GetDeviceConfigCommandOrBuilder
static class	StpApi.GetDeviceConfigResp Protobuf type Impinj.STP.GetDeviceConfigResp Return the device configuration.
static interface	StpApi.GetDeviceConfigRespOrBuilder
static class	StpApi.GetDeviceStateCommand Protobuf type Impinj.STP.GetDeviceStateCommand Request the health of the device.
static interface	StpApi.GetDeviceStateCommandOrBuilder
static class	StpApi.GetDeviceStateResp Protobuf type Impinj.STP.GetDeviceStateResp The health of the device.
static interface	StpApi.GetDeviceStateRespOrBuilder
static class	StpApi.GetOperationDataCommand Protobuf type Impinj.STP.GetOperationDataCommand
static interface	StpApi.GetOperationDataCommandOrBuilder
static class	StpApi.GetOperationDataResp Protobuf type Impinj.STP.GetOperationDataResp
static interface	StpApi.GetOperationDataRespOrBuilder
static class	StpApi.GetVersionsReaderCommand Protobuf type Impinj.STP.GetVersionsReaderCommand Get versions of device firmware, API.
static interface	StpApi.GetVersionsReaderCommandOrBuilder
static class	StpApi.GetVersionsReaderResp Protobuf type Impinj.STP.GetVersionsReaderResp The device firmware and API versions.
static interface	StpApi.GetVersionsReaderRespOrBuilder
static class	StpApi.GPIConfig Protobuf type Impinj.STP.GPIConfig Define how input functions map to signal lines and defines input polarities.
static interface	StpApi.GPIConfigOrBuilder
static class	StpApi.GPIEvent Protobuf type Impinj.STP.GPIEvent Generated when any of the gpi inputs change
static interface	StpApi.GPIEventOrBuilder
static class	StpApi.GPIOPolarity Protobuf enum Impinj.STP.GPIOPolarity
static class	StpApi.GPIOSignalMode Protobuf enum Impinj.STP.GPIOSignalMode The way that GPIOs are used, with functions on the same GPIOs or on separate GPIOs.
static class	StpApi.GPIOState Protobuf enum Impinj.STP.GPIOState
static class	StpApi.GPOConfig Protobuf type Impinj.STP.GPOConfig Define how output functions map to signal lines and defines output polarities.
static interface	StpApi.GPOConfigOrBuilder
static class	StpApi.HandShake Protobuf type Impinj.STP.HandShake API description sent as part of the connection.
static interface	StpApi.HandShakeOrBuilder
static class	StpApi.InterDeviceCommunicationMetrics Protobuf type Impinj.STP.InterDeviceCommunicationMetrics
static interface	StpApi.InterDeviceCommunicationMetricsOrBuilder
static class	StpApi.InvalidResp Protobuf type Impinj.STP.InvalidResp The command sent to the device was not recognized as valid.
static interface	StpApi.InvalidRespOrBuilder
static class	StpApi.InventoryJob Protobuf type Impinj.STP.InventoryJob What to report during an inventory.
static interface	StpApi.InventoryJobOrBuilder
static class	StpApi.InventorySearchMode Protobuf enum Impinj.STP.InventorySearchMode How to inventory tags.
static class	StpApi.LicenseKey Protobuf type Impinj.STP.LicenseKey
static interface	StpApi.LicenseKeyOrBuilder
static class	StpApi.LockConfig Protobuf type Impinj.STP.LockConfig The Gen 2 lock payload.
static interface	StpApi.LockConfigOrBuilder
static class	StpApi.LowEncodeVolumeEvent Protobuf type Impinj.STP.LowEncodeVolumeEvent Generated when the remaining number of encodes falls below a threshold
static class	StpApi.LowEncodeVolumeEventConfig Protobuf type Impinj.STP.LowEncodeVolumeEventConfig Configuration of Low Encode Volume Events
static interface	StpApi.LowEncodeVolumeEventConfigOrBuilder
static interface	StpApi.LowEncodeVolumeEventOrBuilder
static class	StpApi.LowEncodeVolumeEventType Protobuf enum Impinj.STP.LowEncodeVolumeEventType
static class	StpApi.MonzaR6AFeatureConfig Protobuf type Impinj.STP.MonzaR6AFeatureConfig Tag specific feature configuration for Monza R6-A tags.
static interface	StpApi.MonzaR6AFeatureConfigOrBuilder
static class	StpApi.MonzaR6FeatureConfig Protobuf type Impinj.STP.MonzaR6FeatureConfig Tag specific feature configuration for Monza R6 tags.
static interface	StpApi.MonzaR6FeatureConfigOrBuilder
static class	StpApi.MonzaR6PFeatureConfig Protobuf type Impinj.STP.MonzaR6PFeatureConfig Tag specific feature configuration for Monza R6P tags.
static interface	StpApi.MonzaR6PFeatureConfigOrBuilder
static class	StpApi.MonzaR6PMemoryMapConfig Protobuf enum Impinj.STP.MonzaR6PMemoryMapConfig
static class	StpApi.MonzaS6CFeatureConfig Protobuf type Impinj.STP.MonzaS6CFeatureConfig Tag specific feature configuration for Monza S6C tags.
static interface	StpApi.MonzaS6CFeatureConfigOrBuilder
static class	StpApi.MonzaSelfSerialization Protobuf type Impinj.STP.MonzaSelfSerialization Monza Self-Serialization between 34-bits and 96-bits in length.
static interface	StpApi.MonzaSelfSerializationOrBuilder
static class	StpApi.OperationData Protobuf type Impinj.STP.OperationData
static class	StpApi.OperationDataDetails Protobuf type Impinj.STP.OperationDataDetails
static interface	StpApi.OperationDataDetailsOrBuilder
static interface	StpApi.OperationDataOrBuilder
static class	StpApi.OperationEvent Protobuf type Impinj.STP.OperationEvent **NOT YET SUPPORTED** A change in the device operating state driven by completion of the tag operation or a start or stop driven by GPI.
static interface	StpApi.OperationEventOrBuilder
static class	StpApi.OperationEventType Protobuf enum Impinj.STP.OperationEventType **NOT YET SUPPORTED**
static class	StpApi.OperationMetrics Protobuf type Impinj.STP.OperationMetrics
static interface	StpApi.OperationMetricsOrBuilder
static class	StpApi.OperationMode Protobuf enum Impinj.STP.OperationMode How the reader will be used.
static class	StpApi.OperationResponsibility Protobuf type Impinj.STP.OperationResponsibility Define which areas of tag memory this device is responsible for writing and which operations to perform.
static interface	StpApi.OperationResponsibilityOrBuilder
static class	StpApi.OperationSummaryReport Protobuf type Impinj.STP.OperationSummaryReport If enabled in ReportConfig_, this report is sent when the device operation stops.
static class	StpApi.OperationSummaryReportConfig Protobuf type Impinj.STP.OperationSummaryReportConfig Enable a summary report at the end of the device operation.
static interface	StpApi.OperationSummaryReportConfigOrBuilder
static interface	StpApi.OperationSummaryReportOrBuilder
static class	StpApi.OperationSummaryResult Protobuf enum Impinj.STP.OperationSummaryResult
static class	StpApi.OperationTriggerType Protobuf enum Impinj.STP.OperationTriggerType **NOT YET SUPPORTED** The source of the operation start/stop.
static class	StpApi.OrderedListEntries Protobuf type Impinj.STP.OrderedListEntries
static interface	StpApi.OrderedListEntriesOrBuilder
static class	StpApi.OrderedListEntry Protobuf type Impinj.STP.OrderedListEntry
static interface	StpApi.OrderedListEntryOrBuilder
static class	StpApi.Packet Protobuf type Impinj.STP.Packet The top-level Packet will contain a command, its response, or an async report messages.
static interface	StpApi.PacketOrBuilder
static class	StpApi.Password Protobuf type Impinj.STP.Password A password for accessing, securing, or locking a tag.
static class	StpApi.PasswordGenerationMethod Protobuf enum Impinj.STP.PasswordGenerationMethod
static interface	StpApi.PasswordOrBuilder
static class	StpApi.PCWord Protobuf type Impinj.STP.PCWord EPC PC word, see Gen2 specification for packing of bits
static interface	StpApi.PCWordOrBuilder
static class	StpApi.Region Protobuf type Impinj.STP.Region Details needed to specify all region parameters.
static interface	StpApi.RegionOrBuilder
static class	StpApi.RegulatoryRegion Protobuf enum Impinj.STP.RegulatoryRegion RF regulatory region.
static class	StpApi.RemoveSerializationJobCommand Protobuf type Impinj.STP.RemoveSerializationJobCommand **NOT YET SUPPORTED**
static interface	StpApi.RemoveSerializationJobCommandOrBuilder
static class	StpApi.RemoveSerializationJobResp Protobuf type Impinj.STP.RemoveSerializationJobResp **NOT YET SUPPORTED**
static interface	StpApi.RemoveSerializationJobRespOrBuilder
static class	StpApi.Reply Protobuf type Impinj.STP.Reply A response sent by all commands.
static interface	StpApi.ReplyOrBuilder
static class	StpApi.Report Protobuf type Impinj.STP.Report Async messages from Impinj Device to Host
static class	StpApi.ReportConfig Protobuf type Impinj.STP.ReportConfig Define what to report to the client application.
static interface	StpApi.ReportConfigOrBuilder
static interface	StpApi.ReportOrBuilder
static class	StpApi.ReportType Protobuf enum Impinj.STP.ReportType Use this type when registering a report handler.
static class	StpApi.Response Protobuf type Impinj.STP.Response From Impinj Device to Host
static interface	StpApi.ResponseOrBuilder
static class	StpApi.Serialization Protobuf type Impinj.STP.Serialization How serial numbers are determined.
static class	StpApi.SerializationJob Protobuf type Impinj.STP.SerializationJob What to write and whether to set passwords and lock the tag.
static class	StpApi.SerializationJobCompletionCriteria Protobuf enum Impinj.STP.SerializationJobCompletionCriteria
static class	StpApi.SerializationJobFilters Protobuf type Impinj.STP.SerializationJobFilters
static interface	StpApi.SerializationJobFiltersOrBuilder
static interface	StpApi.SerializationJobOrBuilder
static class	StpApi.SerializationJobType Protobuf enum Impinj.STP.SerializationJobType
static interface	StpApi.SerializationOrBuilder
static class	StpApi.SerialNumberRange Protobuf type Impinj.STP.SerialNumberRange Serial number range can be up to 496-bits or full length of EPC (pad left with zeros)
static class	StpApi.SerialNumberRangeFormat Protobuf enum Impinj.STP.SerialNumberRangeFormat Serial Number Range format specifies whether the EPC will be formatted in binary coded hexadecimal or binary coded decimal.
static interface	StpApi.SerialNumberRangeOrBuilder
static class	StpApi.SetAntennaConfigCommand Protobuf type Impinj.STP.SetAntennaConfigCommand Set the configuration for one or more antennas.
static interface	StpApi.SetAntennaConfigCommandOrBuilder
static class	StpApi.SetAntennaConfigResp Protobuf type Impinj.STP.SetAntennaConfigResp See SetAntennaConfigCommand_.
static interface	StpApi.SetAntennaConfigRespOrBuilder
static class	StpApi.SetCartonContentsJobCommand Protobuf type Impinj.STP.SetCartonContentsJobCommand
static interface	StpApi.SetCartonContentsJobCommandOrBuilder
static class	StpApi.SetCartonContentsJobResp Protobuf type Impinj.STP.SetCartonContentsJobResp
static interface	StpApi.SetCartonContentsJobRespOrBuilder
static class	StpApi.SetDeviceConfigCommand Protobuf type Impinj.STP.SetDeviceConfigCommand Set the device's behavior.
static interface	StpApi.SetDeviceConfigCommandOrBuilder
static class	StpApi.SetDeviceConfigResp Protobuf type Impinj.STP.SetDeviceConfigResp See SetDeviceConfigCommand_.
static interface	StpApi.SetDeviceConfigRespOrBuilder
static class	StpApi.SetInventoryJobCommand Protobuf type Impinj.STP.SetInventoryJobCommand
static interface	StpApi.SetInventoryJobCommandOrBuilder
static class	StpApi.SetInventoryJobResp Protobuf type Impinj.STP.SetInventoryJobResp
static interface	StpApi.SetInventoryJobRespOrBuilder
static class	StpApi.SetOperationResultGPOCommand Protobuf type Impinj.STP.SetOperationResultGPOCommand
static interface	StpApi.SetOperationResultGPOCommandOrBuilder
static class	StpApi.SetOperationResultGPOResp Protobuf type Impinj.STP.SetOperationResultGPOResp See SetOperationResultGPOCommand_.
static interface	StpApi.SetOperationResultGPORespOrBuilder
static class	StpApi.StartCommand Protobuf type Impinj.STP.StartCommand Start the encode or inventory operation.
static interface	StpApi.StartCommandOrBuilder
static class	StpApi.StartResp Protobuf type Impinj.STP.StartResp The reply to StartCommand_.
static interface	StpApi.StartRespOrBuilder
static class	StpApi.StartTriggerConfig Protobuf type Impinj.STP.StartTriggerConfig Always accept the start command from the client or optionally a GPI start trigger.
static interface	StpApi.StartTriggerConfigOrBuilder
static class	StpApi.StopCommand Protobuf type Impinj.STP.StopCommand Stop the current device encode or inventory operation.
static interface	StpApi.StopCommandOrBuilder
static class	StpApi.StopResp Protobuf type Impinj.STP.StopResp See StopCommand_.
static interface	StpApi.StopRespOrBuilder
static class	StpApi.StopTriggerConfig Protobuf type Impinj.STP.StopTriggerConfig Always accept stop command from the client or optionally from GPI, count, or timeout.
static interface	StpApi.StopTriggerConfigOrBuilder
static class	StpApi.STPDevice Protobuf type Impinj.STP.STPDevice
static interface	StpApi.STPDeviceOrBuilder
static class	StpApi.TagMetrics Protobuf type Impinj.STP.TagMetrics
static interface	StpApi.TagMetricsOrBuilder
static class	StpApi.TagModeMetrics Protobuf type Impinj.STP.TagModeMetrics
static interface	StpApi.TagModeMetricsOrBuilder
static class	StpApi.TagOperationReport Protobuf type Impinj.STP.TagOperationReport Timestamp, antenna id, frequency, RSSI should be last values on last attempt.
static class	StpApi.TagOperationReportConfig Protobuf type Impinj.STP.TagOperationReportConfig Configure what types of reports to send from the device.
static interface	StpApi.TagOperationReportConfigOrBuilder
static interface	StpApi.TagOperationReportOrBuilder
static class	StpApi.TagOperationReportTrigger Protobuf enum Impinj.STP.TagOperationReportTrigger
static class	StpApi.TagOperationReportType Protobuf enum Impinj.STP.TagOperationReportType
static class	StpApi.TagOperationResult Protobuf enum Impinj.STP.TagOperationResult
static class	StpApi.TIDMemory Protobuf type Impinj.STP.TIDMemory Describes the TID memory of a tag.
static interface	StpApi.TIDMemoryOrBuilder
static class	StpApi.TIDTableEntries Protobuf type Impinj.STP.TIDTableEntries A list of tag operations to perform.
static interface	StpApi.TIDTableEntriesOrBuilder
static class	StpApi.TIDTableEntry Protobuf type Impinj.STP.TIDTableEntry Describes the operation to perform on a single tag.
static interface	StpApi.TIDTableEntryOrBuilder
static class	StpApi.Timestamp Protobuf type Impinj.STP.Timestamp The time that an event happened on the device.
static interface	StpApi.TimestampOrBuilder
static class	StpApi.TriggerConfig Protobuf type Impinj.STP.TriggerConfig Define how GPI signals affect operations start and stop.
static interface	StpApi.TriggerConfigOrBuilder
static class	StpApi.Update Protobuf type Impinj.STP.Update Async messages from host to device.
static interface	StpApi.UpdateOrBuilder
static class	StpApi.UserMemory Protobuf type Impinj.STP.UserMemory
static interface	StpApi.UserMemoryOrBuilder
static class	StpApi.Version Protobuf type Impinj.STP.Version A version of part of the system.
static interface	StpApi.VersionOrBuilder
static class	StpApi.Versions Protobuf type Impinj.STP.Versions A list of local API library and device versions.
static interface	StpApi.VersionsOrBuilder
static class	StpApi.VersionType Protobuf enum Impinj.STP.VersionType The local library or remote device component corresponding to the version.
static class	StpApi.VoidTagConfig Protobuf type Impinj.STP.VoidTagConfig
static interface	StpApi.VoidTagConfigOrBuilder
static class	StpApi.VoidTagResponsibility Protobuf type Impinj.STP.VoidTagResponsibility
static interface	StpApi.VoidTagResponsibilityOrBuilder

Method Summary

Modifier and Type	Method and Description
static com.google.protobuf.Descriptors.FileDescriptor	getDescriptor()
static void	registerAllExtensions(com.google.protobuf.ExtensionRegistry registry)

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Method Detail

registerAllExtensions

public static void registerAllExtensions(com.google.protobuf.ExtensionRegistry registry)

getDescriptor

public static com.google.protobuf.Descriptors.FileDescriptor getDescriptor()