StpApi.Command.Builder (stplib 2.7.11.240 API)

java.lang.Object
- com.google.protobuf.AbstractMessageLite.Builder<BuilderType>
- - com.google.protobuf.AbstractMessage.Builder<BuilderType>
  - - com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
    - - com.impinj.stp.StpApi.Command.Builder

All Implemented Interfaces:

com.google.protobuf.Message.Builder, com.google.protobuf.MessageLite.Builder, com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder, StpApi.CommandOrBuilder, java.lang.Cloneable

Enclosing class:

StpApi.Command
```
public static final class StpApi.Command.Builder
extends com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
implements StpApi.CommandOrBuilder
```
Protobuf type Impinj.STP.Command From Host to Impinj Device

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`StpApi.Command`	`build()`
`StpApi.Command`	`buildPartial()`
`StpApi.Command.Builder`	`clear()`
`StpApi.Command.Builder`	`clearAddLicenseKey()`
`StpApi.Command.Builder`	`clearAddOrderedListEntries()`
`StpApi.Command.Builder`	`clearAddSerializationJob()`
`StpApi.Command.Builder`	`clearAddTidTableEntries()`
`StpApi.Command.Builder`	`clearConnect()` Connect to device.
`StpApi.Command.Builder`	`clearDisengage()`
`StpApi.Command.Builder`	`clearEngage()`
`StpApi.Command.Builder`	`clearGetAntennaConfig()`
`StpApi.Command.Builder`	`clearGetDeviceConfig()`
`StpApi.Command.Builder`	`clearGetDeviceState()` Get the state (operating, fault, etc.) of the device.
`StpApi.Command.Builder`	`clearGetOperationData()`
`StpApi.Command.Builder`	`clearGetVersionsReader()` Return all version information reported by the device and by the host-side library.
`StpApi.Command.Builder`	`clearRemoveSerializationJob()`
`StpApi.Command.Builder`	`clearSetAntennaConfig()`
`StpApi.Command.Builder`	`clearSetCartonContentsJob()`
`StpApi.Command.Builder`	`clearSetDeviceConfig()`
`StpApi.Command.Builder`	`clearSetInventoryJob()`
`StpApi.Command.Builder`	`clearSetOperationResultGpo()` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.Command.Builder`	`clearStart()` Start the encode or inventory run.
`StpApi.Command.Builder`	`clearStop()` Stop the encode or inventory run.
`StpApi.Command.Builder`	`clone()`
`StpApi.AddLicenseKeyCommand`	`getAddLicenseKey()`
`StpApi.AddLicenseKeyCommand.Builder`	`getAddLicenseKeyBuilder()`
`StpApi.AddLicenseKeyCommandOrBuilder`	`getAddLicenseKeyOrBuilder()`
`StpApi.AddOrderedListEntriesCommand`	`getAddOrderedListEntries()`
`StpApi.AddOrderedListEntriesCommand.Builder`	`getAddOrderedListEntriesBuilder()`
`StpApi.AddOrderedListEntriesCommandOrBuilder`	`getAddOrderedListEntriesOrBuilder()`
`StpApi.AddSerializationJobCommand`	`getAddSerializationJob()`
`StpApi.AddSerializationJobCommand.Builder`	`getAddSerializationJobBuilder()`
`StpApi.AddSerializationJobCommandOrBuilder`	`getAddSerializationJobOrBuilder()`
`StpApi.AddTIDTableEntriesCommand`	`getAddTidTableEntries()`
`StpApi.AddTIDTableEntriesCommand.Builder`	`getAddTidTableEntriesBuilder()`
`StpApi.AddTIDTableEntriesCommandOrBuilder`	`getAddTidTableEntriesOrBuilder()`
`StpApi.ConnectCommand`	`getConnect()` Connect to device.
`StpApi.ConnectCommand.Builder`	`getConnectBuilder()` Connect to device.
`StpApi.ConnectCommandOrBuilder`	`getConnectOrBuilder()` Connect to device.
`StpApi.Command`	`getDefaultInstanceForType()`
`static com.google.protobuf.Descriptors.Descriptor`	`getDescriptor()`
`com.google.protobuf.Descriptors.Descriptor`	`getDescriptorForType()`
`StpApi.DisengageCommand`	`getDisengage()`
`StpApi.DisengageCommand.Builder`	`getDisengageBuilder()`
`StpApi.DisengageCommandOrBuilder`	`getDisengageOrBuilder()`
`StpApi.EngageCommand`	`getEngage()`
`StpApi.EngageCommand.Builder`	`getEngageBuilder()`
`StpApi.EngageCommandOrBuilder`	`getEngageOrBuilder()`
`StpApi.GetAntennaConfigCommand`	`getGetAntennaConfig()`
`StpApi.GetAntennaConfigCommand.Builder`	`getGetAntennaConfigBuilder()`
`StpApi.GetAntennaConfigCommandOrBuilder`	`getGetAntennaConfigOrBuilder()`
`StpApi.GetDeviceConfigCommand`	`getGetDeviceConfig()`
`StpApi.GetDeviceConfigCommand.Builder`	`getGetDeviceConfigBuilder()`
`StpApi.GetDeviceConfigCommandOrBuilder`	`getGetDeviceConfigOrBuilder()`
`StpApi.GetDeviceStateCommand`	`getGetDeviceState()` Get the state (operating, fault, etc.) of the device.
`StpApi.GetDeviceStateCommand.Builder`	`getGetDeviceStateBuilder()` Get the state (operating, fault, etc.) of the device.
`StpApi.GetDeviceStateCommandOrBuilder`	`getGetDeviceStateOrBuilder()` Get the state (operating, fault, etc.) of the device.
`StpApi.GetOperationDataCommand`	`getGetOperationData()`
`StpApi.GetOperationDataCommand.Builder`	`getGetOperationDataBuilder()`
`StpApi.GetOperationDataCommandOrBuilder`	`getGetOperationDataOrBuilder()`
`StpApi.GetVersionsReaderCommand`	`getGetVersionsReader()` Return all version information reported by the device and by the host-side library.
`StpApi.GetVersionsReaderCommand.Builder`	`getGetVersionsReaderBuilder()` Return all version information reported by the device and by the host-side library.
`StpApi.GetVersionsReaderCommandOrBuilder`	`getGetVersionsReaderOrBuilder()` Return all version information reported by the device and by the host-side library.
`StpApi.RemoveSerializationJobCommand`	`getRemoveSerializationJob()`
`StpApi.RemoveSerializationJobCommand.Builder`	`getRemoveSerializationJobBuilder()`
`StpApi.RemoveSerializationJobCommandOrBuilder`	`getRemoveSerializationJobOrBuilder()`
`StpApi.SetAntennaConfigCommand`	`getSetAntennaConfig()`
`StpApi.SetAntennaConfigCommand.Builder`	`getSetAntennaConfigBuilder()`
`StpApi.SetAntennaConfigCommandOrBuilder`	`getSetAntennaConfigOrBuilder()`
`StpApi.SetCartonContentsJobCommand`	`getSetCartonContentsJob()`
`StpApi.SetCartonContentsJobCommand.Builder`	`getSetCartonContentsJobBuilder()`
`StpApi.SetCartonContentsJobCommandOrBuilder`	`getSetCartonContentsJobOrBuilder()`
`StpApi.SetDeviceConfigCommand`	`getSetDeviceConfig()`
`StpApi.SetDeviceConfigCommand.Builder`	`getSetDeviceConfigBuilder()`
`StpApi.SetDeviceConfigCommandOrBuilder`	`getSetDeviceConfigOrBuilder()`
`StpApi.SetInventoryJobCommand`	`getSetInventoryJob()`
`StpApi.SetInventoryJobCommand.Builder`	`getSetInventoryJobBuilder()`
`StpApi.SetInventoryJobCommandOrBuilder`	`getSetInventoryJobOrBuilder()`
`StpApi.SetOperationResultGPOCommand`	`getSetOperationResultGpo()` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.SetOperationResultGPOCommand.Builder`	`getSetOperationResultGpoBuilder()` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.SetOperationResultGPOCommandOrBuilder`	`getSetOperationResultGpoOrBuilder()` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.StartCommand`	`getStart()` Start the encode or inventory run.
`StpApi.StartCommand.Builder`	`getStartBuilder()` Start the encode or inventory run.
`StpApi.StartCommandOrBuilder`	`getStartOrBuilder()` Start the encode or inventory run.
`StpApi.StopCommand`	`getStop()` Stop the encode or inventory run.
`StpApi.StopCommand.Builder`	`getStopBuilder()` Stop the encode or inventory run.
`StpApi.StopCommandOrBuilder`	`getStopOrBuilder()` Stop the encode or inventory run.
`boolean`	`hasAddLicenseKey()`
`boolean`	`hasAddOrderedListEntries()`
`boolean`	`hasAddSerializationJob()`
`boolean`	`hasAddTidTableEntries()`
`boolean`	`hasConnect()` Connect to device.
`boolean`	`hasDisengage()`
`boolean`	`hasEngage()`
`boolean`	`hasGetAntennaConfig()`
`boolean`	`hasGetDeviceConfig()`
`boolean`	`hasGetDeviceState()` Get the state (operating, fault, etc.) of the device.
`boolean`	`hasGetOperationData()`
`boolean`	`hasGetVersionsReader()` Return all version information reported by the device and by the host-side library.
`boolean`	`hasRemoveSerializationJob()`
`boolean`	`hasSetAntennaConfig()`
`boolean`	`hasSetCartonContentsJob()`
`boolean`	`hasSetDeviceConfig()`
`boolean`	`hasSetInventoryJob()`
`boolean`	`hasSetOperationResultGpo()` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`boolean`	`hasStart()` Start the encode or inventory run.
`boolean`	`hasStop()` Stop the encode or inventory run.
`protected com.google.protobuf.GeneratedMessage.FieldAccessorTable`	`internalGetFieldAccessorTable()`
`boolean`	`isInitialized()`
`StpApi.Command.Builder`	`mergeAddLicenseKey(StpApi.AddLicenseKeyCommand value)`
`StpApi.Command.Builder`	`mergeAddOrderedListEntries(StpApi.AddOrderedListEntriesCommand value)`
`StpApi.Command.Builder`	`mergeAddSerializationJob(StpApi.AddSerializationJobCommand value)`
`StpApi.Command.Builder`	`mergeAddTidTableEntries(StpApi.AddTIDTableEntriesCommand value)`
`StpApi.Command.Builder`	`mergeConnect(StpApi.ConnectCommand value)` Connect to device.
`StpApi.Command.Builder`	`mergeDisengage(StpApi.DisengageCommand value)`
`StpApi.Command.Builder`	`mergeEngage(StpApi.EngageCommand value)`
`StpApi.Command.Builder`	`mergeFrom(com.google.protobuf.CodedInputStream input, com.google.protobuf.ExtensionRegistryLite extensionRegistry)`
`StpApi.Command.Builder`	`mergeFrom(com.google.protobuf.Message other)`
`StpApi.Command.Builder`	`mergeFrom(StpApi.Command other)`
`StpApi.Command.Builder`	`mergeGetAntennaConfig(StpApi.GetAntennaConfigCommand value)`
`StpApi.Command.Builder`	`mergeGetDeviceConfig(StpApi.GetDeviceConfigCommand value)`
`StpApi.Command.Builder`	`mergeGetDeviceState(StpApi.GetDeviceStateCommand value)` Get the state (operating, fault, etc.) of the device.
`StpApi.Command.Builder`	`mergeGetOperationData(StpApi.GetOperationDataCommand value)`
`StpApi.Command.Builder`	`mergeGetVersionsReader(StpApi.GetVersionsReaderCommand value)` Return all version information reported by the device and by the host-side library.
`StpApi.Command.Builder`	`mergeRemoveSerializationJob(StpApi.RemoveSerializationJobCommand value)`
`StpApi.Command.Builder`	`mergeSetAntennaConfig(StpApi.SetAntennaConfigCommand value)`
`StpApi.Command.Builder`	`mergeSetCartonContentsJob(StpApi.SetCartonContentsJobCommand value)`
`StpApi.Command.Builder`	`mergeSetDeviceConfig(StpApi.SetDeviceConfigCommand value)`
`StpApi.Command.Builder`	`mergeSetInventoryJob(StpApi.SetInventoryJobCommand value)`
`StpApi.Command.Builder`	`mergeSetOperationResultGpo(StpApi.SetOperationResultGPOCommand value)` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.Command.Builder`	`mergeStart(StpApi.StartCommand value)` Start the encode or inventory run.
`StpApi.Command.Builder`	`mergeStop(StpApi.StopCommand value)` Stop the encode or inventory run.
`StpApi.Command.Builder`	`setAddLicenseKey(StpApi.AddLicenseKeyCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setAddLicenseKey(StpApi.AddLicenseKeyCommand value)`
`StpApi.Command.Builder`	`setAddOrderedListEntries(StpApi.AddOrderedListEntriesCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setAddOrderedListEntries(StpApi.AddOrderedListEntriesCommand value)`
`StpApi.Command.Builder`	`setAddSerializationJob(StpApi.AddSerializationJobCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setAddSerializationJob(StpApi.AddSerializationJobCommand value)`
`StpApi.Command.Builder`	`setAddTidTableEntries(StpApi.AddTIDTableEntriesCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setAddTidTableEntries(StpApi.AddTIDTableEntriesCommand value)`
`StpApi.Command.Builder`	`setConnect(StpApi.ConnectCommand.Builder builderForValue)` Connect to device.
`StpApi.Command.Builder`	`setConnect(StpApi.ConnectCommand value)` Connect to device.
`StpApi.Command.Builder`	`setDisengage(StpApi.DisengageCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setDisengage(StpApi.DisengageCommand value)`
`StpApi.Command.Builder`	`setEngage(StpApi.EngageCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setEngage(StpApi.EngageCommand value)`
`StpApi.Command.Builder`	`setGetAntennaConfig(StpApi.GetAntennaConfigCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setGetAntennaConfig(StpApi.GetAntennaConfigCommand value)`
`StpApi.Command.Builder`	`setGetDeviceConfig(StpApi.GetDeviceConfigCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setGetDeviceConfig(StpApi.GetDeviceConfigCommand value)`
`StpApi.Command.Builder`	`setGetDeviceState(StpApi.GetDeviceStateCommand.Builder builderForValue)` Get the state (operating, fault, etc.) of the device.
`StpApi.Command.Builder`	`setGetDeviceState(StpApi.GetDeviceStateCommand value)` Get the state (operating, fault, etc.) of the device.
`StpApi.Command.Builder`	`setGetOperationData(StpApi.GetOperationDataCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setGetOperationData(StpApi.GetOperationDataCommand value)`
`StpApi.Command.Builder`	`setGetVersionsReader(StpApi.GetVersionsReaderCommand.Builder builderForValue)` Return all version information reported by the device and by the host-side library.
`StpApi.Command.Builder`	`setGetVersionsReader(StpApi.GetVersionsReaderCommand value)` Return all version information reported by the device and by the host-side library.
`StpApi.Command.Builder`	`setRemoveSerializationJob(StpApi.RemoveSerializationJobCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setRemoveSerializationJob(StpApi.RemoveSerializationJobCommand value)`
`StpApi.Command.Builder`	`setSetAntennaConfig(StpApi.SetAntennaConfigCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setSetAntennaConfig(StpApi.SetAntennaConfigCommand value)`
`StpApi.Command.Builder`	`setSetCartonContentsJob(StpApi.SetCartonContentsJobCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setSetCartonContentsJob(StpApi.SetCartonContentsJobCommand value)`
`StpApi.Command.Builder`	`setSetDeviceConfig(StpApi.SetDeviceConfigCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setSetDeviceConfig(StpApi.SetDeviceConfigCommand value)`
`StpApi.Command.Builder`	`setSetInventoryJob(StpApi.SetInventoryJobCommand.Builder builderForValue)`
`StpApi.Command.Builder`	`setSetInventoryJob(StpApi.SetInventoryJobCommand value)`
`StpApi.Command.Builder`	`setSetOperationResultGpo(StpApi.SetOperationResultGPOCommand.Builder builderForValue)` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.Command.Builder`	`setSetOperationResultGpo(StpApi.SetOperationResultGPOCommand value)` When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
`StpApi.Command.Builder`	`setStart(StpApi.StartCommand.Builder builderForValue)` Start the encode or inventory run.
`StpApi.Command.Builder`	`setStart(StpApi.StartCommand value)` Start the encode or inventory run.
`StpApi.Command.Builder`	`setStop(StpApi.StopCommand.Builder builderForValue)` Stop the encode or inventory run.
`StpApi.Command.Builder`	`setStop(StpApi.StopCommand value)` Stop the encode or inventory run.

Methods inherited from class com.google.protobuf.GeneratedMessage.Builder
addRepeatedField, clearField, getAllFields, getField, getFieldBuilder, getParentForChildren, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField, isClean, markClean, mergeUnknownFields, newBuilderForField, onBuilt, onChanged, parseUnknownField, setField, setRepeatedField, setUnknownFields

Methods inherited from class com.google.protobuf.AbstractMessage.Builder
findInitializationErrors, getInitializationErrorString, mergeDelimitedFrom, mergeDelimitedFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, mergeFrom, newUninitializedMessageException

Methods inherited from class com.google.protobuf.AbstractMessageLite.Builder
addAll, newUninitializedMessageException

Methods inherited from class java.lang.Object
equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface com.google.protobuf.MessageOrBuilder
findInitializationErrors, getAllFields, getField, getInitializationErrorString, getRepeatedField, getRepeatedFieldCount, getUnknownFields, hasField

- Method Detail
  - getDescriptor
```
public static final com.google.protobuf.Descriptors.Descriptor getDescriptor()
```
  - internalGetFieldAccessorTable
```
protected com.google.protobuf.GeneratedMessage.FieldAccessorTable internalGetFieldAccessorTable()
```
    Specified by:
    
    internalGetFieldAccessorTable in class com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
  - clear
```
public StpApi.Command.Builder clear()
```
    Specified by:
    
    clear in interface com.google.protobuf.Message.Builder
    
    Specified by:
    
    clear in interface com.google.protobuf.MessageLite.Builder
    
    Overrides:
    
    clear in class com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
  - clone
```
public StpApi.Command.Builder clone()
```
    Specified by:
    
    clone in interface com.google.protobuf.Message.Builder
    
    Specified by:
    
    clone in interface com.google.protobuf.MessageLite.Builder
    
    Overrides:
    
    clone in class com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
  - getDescriptorForType
```
public com.google.protobuf.Descriptors.Descriptor getDescriptorForType()
```
    Specified by:
    
    getDescriptorForType in interface com.google.protobuf.Message.Builder
    
    Specified by:
    
    getDescriptorForType in interface com.google.protobuf.MessageOrBuilder
    
    Overrides:
    
    getDescriptorForType in class com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
  - getDefaultInstanceForType
```
public StpApi.Command getDefaultInstanceForType()
```
    Specified by:
    
    getDefaultInstanceForType in interface com.google.protobuf.MessageLiteOrBuilder
    
    Specified by:
    
    getDefaultInstanceForType in interface com.google.protobuf.MessageOrBuilder
  - build
```
public StpApi.Command build()
```
    Specified by:
    
    build in interface com.google.protobuf.Message.Builder
    
    Specified by:
    
    build in interface com.google.protobuf.MessageLite.Builder
  - buildPartial
```
public StpApi.Command buildPartial()
```
    Specified by:
    
    buildPartial in interface com.google.protobuf.Message.Builder
    
    Specified by:
    
    buildPartial in interface com.google.protobuf.MessageLite.Builder
  - mergeFrom
```
public StpApi.Command.Builder mergeFrom(com.google.protobuf.Message other)
```
    Specified by:
    
    mergeFrom in interface com.google.protobuf.Message.Builder
    
    Overrides:
    
    mergeFrom in class com.google.protobuf.AbstractMessage.Builder<StpApi.Command.Builder>
  - mergeFrom
```
public StpApi.Command.Builder mergeFrom(StpApi.Command other)
```
  - isInitialized
```
public final boolean isInitialized()
```
    Specified by:
    
    isInitialized in interface com.google.protobuf.MessageLiteOrBuilder
    
    Overrides:
    
    isInitialized in class com.google.protobuf.GeneratedMessage.Builder<StpApi.Command.Builder>
  - mergeFrom
```
public StpApi.Command.Builder mergeFrom(com.google.protobuf.CodedInputStream input,
                                        com.google.protobuf.ExtensionRegistryLite extensionRegistry)
                                 throws java.io.IOException
```
    Specified by:
    
    mergeFrom in interface com.google.protobuf.Message.Builder
    
    Specified by:
    
    mergeFrom in interface com.google.protobuf.MessageLite.Builder
    
    Overrides:
    
    mergeFrom in class com.google.protobuf.AbstractMessage.Builder<StpApi.Command.Builder>
    
    Throws:
    
    java.io.IOException
  - hasConnect
```
public boolean hasConnect()
```
    Connect to device.
    
    Specified by:
    
    hasConnect in interface StpApi.CommandOrBuilder
  - getConnect
```
public StpApi.ConnectCommand getConnect()
```
    Connect to device.
    
    Specified by:
    
    getConnect in interface StpApi.CommandOrBuilder
  - setConnect
```
public StpApi.Command.Builder setConnect(StpApi.ConnectCommand value)
```
    Connect to device.
  - setConnect
```
public StpApi.Command.Builder setConnect(StpApi.ConnectCommand.Builder builderForValue)
```
    Connect to device.
  - mergeConnect
```
public StpApi.Command.Builder mergeConnect(StpApi.ConnectCommand value)
```
    Connect to device.
  - clearConnect
```
public StpApi.Command.Builder clearConnect()
```
    Connect to device.
  - getConnectBuilder
```
public StpApi.ConnectCommand.Builder getConnectBuilder()
```
    Connect to device.
  - getConnectOrBuilder
```
public StpApi.ConnectCommandOrBuilder getConnectOrBuilder()
```
    Connect to device.
    
    Specified by:
    
    getConnectOrBuilder in interface StpApi.CommandOrBuilder
  - hasGetVersionsReader
```
public boolean hasGetVersionsReader()
```
    Return all version information reported by the device and by the host-side library.
    
    Specified by:
    
    hasGetVersionsReader in interface StpApi.CommandOrBuilder
  - getGetVersionsReader
```
public StpApi.GetVersionsReaderCommand getGetVersionsReader()
```
    Return all version information reported by the device and by the host-side library.
    
    Specified by:
    
    getGetVersionsReader in interface StpApi.CommandOrBuilder
  - setGetVersionsReader
```
public StpApi.Command.Builder setGetVersionsReader(StpApi.GetVersionsReaderCommand value)
```
    Return all version information reported by the device and by the host-side library.
  - setGetVersionsReader
```
public StpApi.Command.Builder setGetVersionsReader(StpApi.GetVersionsReaderCommand.Builder builderForValue)
```
    Return all version information reported by the device and by the host-side library.
  - mergeGetVersionsReader
```
public StpApi.Command.Builder mergeGetVersionsReader(StpApi.GetVersionsReaderCommand value)
```
    Return all version information reported by the device and by the host-side library.
  - clearGetVersionsReader
```
public StpApi.Command.Builder clearGetVersionsReader()
```
    Return all version information reported by the device and by the host-side library.
  - getGetVersionsReaderBuilder
```
public StpApi.GetVersionsReaderCommand.Builder getGetVersionsReaderBuilder()
```
    Return all version information reported by the device and by the host-side library.
  - getGetVersionsReaderOrBuilder
```
public StpApi.GetVersionsReaderCommandOrBuilder getGetVersionsReaderOrBuilder()
```
    Return all version information reported by the device and by the host-side library.
    
    Specified by:
    
    getGetVersionsReaderOrBuilder in interface StpApi.CommandOrBuilder
  - hasStart
```
public boolean hasStart()
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
    
    Specified by:
    
    hasStart in interface StpApi.CommandOrBuilder
  - getStart
```
public StpApi.StartCommand getStart()
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
    
    Specified by:
    
    getStart in interface StpApi.CommandOrBuilder
  - setStart
```
public StpApi.Command.Builder setStart(StpApi.StartCommand value)
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
  - setStart
```
public StpApi.Command.Builder setStart(StpApi.StartCommand.Builder builderForValue)
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
  - mergeStart
```
public StpApi.Command.Builder mergeStart(StpApi.StartCommand value)
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
  - clearStart
```
public StpApi.Command.Builder clearStart()
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
  - getStartBuilder
```
public StpApi.StartCommand.Builder getStartBuilder()
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
  - getStartOrBuilder
```
public StpApi.StartCommandOrBuilder getStartOrBuilder()
```
    Start the encode or inventory run. The device must be engaged with GPI or by calling engage before starting.
    
    Specified by:
    
    getStartOrBuilder in interface StpApi.CommandOrBuilder
  - hasStop
```
public boolean hasStop()
```
    Stop the encode or inventory run. The device must be operating.
    
    Specified by:
    
    hasStop in interface StpApi.CommandOrBuilder
  - getStop
```
public StpApi.StopCommand getStop()
```
    Stop the encode or inventory run. The device must be operating.
    
    Specified by:
    
    getStop in interface StpApi.CommandOrBuilder
  - setStop
```
public StpApi.Command.Builder setStop(StpApi.StopCommand value)
```
    Stop the encode or inventory run. The device must be operating.
  - setStop
```
public StpApi.Command.Builder setStop(StpApi.StopCommand.Builder builderForValue)
```
    Stop the encode or inventory run. The device must be operating.
  - mergeStop
```
public StpApi.Command.Builder mergeStop(StpApi.StopCommand value)
```
    Stop the encode or inventory run. The device must be operating.
  - clearStop
```
public StpApi.Command.Builder clearStop()
```
    Stop the encode or inventory run. The device must be operating.
  - getStopBuilder
```
public StpApi.StopCommand.Builder getStopBuilder()
```
    Stop the encode or inventory run. The device must be operating.
  - getStopOrBuilder
```
public StpApi.StopCommandOrBuilder getStopOrBuilder()
```
    Stop the encode or inventory run. The device must be operating.
    
    Specified by:
    
    getStopOrBuilder in interface StpApi.CommandOrBuilder
  - hasGetDeviceState
```
public boolean hasGetDeviceState()
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
    
    Specified by:
    
    hasGetDeviceState in interface StpApi.CommandOrBuilder
  - getGetDeviceState
```
public StpApi.GetDeviceStateCommand getGetDeviceState()
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
    
    Specified by:
    
    getGetDeviceState in interface StpApi.CommandOrBuilder
  - setGetDeviceState
```
public StpApi.Command.Builder setGetDeviceState(StpApi.GetDeviceStateCommand value)
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
  - setGetDeviceState
```
public StpApi.Command.Builder setGetDeviceState(StpApi.GetDeviceStateCommand.Builder builderForValue)
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
  - mergeGetDeviceState
```
public StpApi.Command.Builder mergeGetDeviceState(StpApi.GetDeviceStateCommand value)
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
  - clearGetDeviceState
```
public StpApi.Command.Builder clearGetDeviceState()
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
  - getGetDeviceStateBuilder
```
public StpApi.GetDeviceStateCommand.Builder getGetDeviceStateBuilder()
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
  - getGetDeviceStateOrBuilder
```
public StpApi.GetDeviceStateCommandOrBuilder getGetDeviceStateOrBuilder()
```
    Get the state (operating, fault, etc.) of the device. Contains a fault description, if any.
    
    Specified by:
    
    getGetDeviceStateOrBuilder in interface StpApi.CommandOrBuilder
  - hasSetDeviceConfig
```
public boolean hasSetDeviceConfig()
```
    Specified by:
    
    hasSetDeviceConfig in interface StpApi.CommandOrBuilder
  - getSetDeviceConfig
```
public StpApi.SetDeviceConfigCommand getSetDeviceConfig()
```
    Specified by:
    
    getSetDeviceConfig in interface StpApi.CommandOrBuilder
  - setSetDeviceConfig
```
public StpApi.Command.Builder setSetDeviceConfig(StpApi.SetDeviceConfigCommand value)
```
  - setSetDeviceConfig
```
public StpApi.Command.Builder setSetDeviceConfig(StpApi.SetDeviceConfigCommand.Builder builderForValue)
```
  - mergeSetDeviceConfig
```
public StpApi.Command.Builder mergeSetDeviceConfig(StpApi.SetDeviceConfigCommand value)
```
  - clearSetDeviceConfig
```
public StpApi.Command.Builder clearSetDeviceConfig()
```
  - getSetDeviceConfigBuilder
```
public StpApi.SetDeviceConfigCommand.Builder getSetDeviceConfigBuilder()
```
  - getSetDeviceConfigOrBuilder
```
public StpApi.SetDeviceConfigCommandOrBuilder getSetDeviceConfigOrBuilder()
```
    Specified by:
    
    getSetDeviceConfigOrBuilder in interface StpApi.CommandOrBuilder
  - hasGetDeviceConfig
```
public boolean hasGetDeviceConfig()
```
    Specified by:
    
    hasGetDeviceConfig in interface StpApi.CommandOrBuilder
  - getGetDeviceConfig
```
public StpApi.GetDeviceConfigCommand getGetDeviceConfig()
```
    Specified by:
    
    getGetDeviceConfig in interface StpApi.CommandOrBuilder
  - setGetDeviceConfig
```
public StpApi.Command.Builder setGetDeviceConfig(StpApi.GetDeviceConfigCommand value)
```
  - setGetDeviceConfig
```
public StpApi.Command.Builder setGetDeviceConfig(StpApi.GetDeviceConfigCommand.Builder builderForValue)
```
  - mergeGetDeviceConfig
```
public StpApi.Command.Builder mergeGetDeviceConfig(StpApi.GetDeviceConfigCommand value)
```
  - clearGetDeviceConfig
```
public StpApi.Command.Builder clearGetDeviceConfig()
```
  - getGetDeviceConfigBuilder
```
public StpApi.GetDeviceConfigCommand.Builder getGetDeviceConfigBuilder()
```
  - getGetDeviceConfigOrBuilder
```
public StpApi.GetDeviceConfigCommandOrBuilder getGetDeviceConfigOrBuilder()
```
    Specified by:
    
    getGetDeviceConfigOrBuilder in interface StpApi.CommandOrBuilder
  - hasSetAntennaConfig
```
public boolean hasSetAntennaConfig()
```
    Specified by:
    
    hasSetAntennaConfig in interface StpApi.CommandOrBuilder
  - getSetAntennaConfig
```
public StpApi.SetAntennaConfigCommand getSetAntennaConfig()
```
    Specified by:
    
    getSetAntennaConfig in interface StpApi.CommandOrBuilder
  - setSetAntennaConfig
```
public StpApi.Command.Builder setSetAntennaConfig(StpApi.SetAntennaConfigCommand value)
```
  - setSetAntennaConfig
```
public StpApi.Command.Builder setSetAntennaConfig(StpApi.SetAntennaConfigCommand.Builder builderForValue)
```
  - mergeSetAntennaConfig
```
public StpApi.Command.Builder mergeSetAntennaConfig(StpApi.SetAntennaConfigCommand value)
```
  - clearSetAntennaConfig
```
public StpApi.Command.Builder clearSetAntennaConfig()
```
  - getSetAntennaConfigBuilder
```
public StpApi.SetAntennaConfigCommand.Builder getSetAntennaConfigBuilder()
```
  - getSetAntennaConfigOrBuilder
```
public StpApi.SetAntennaConfigCommandOrBuilder getSetAntennaConfigOrBuilder()
```
    Specified by:
    
    getSetAntennaConfigOrBuilder in interface StpApi.CommandOrBuilder
  - hasGetAntennaConfig
```
public boolean hasGetAntennaConfig()
```
    Specified by:
    
    hasGetAntennaConfig in interface StpApi.CommandOrBuilder
  - getGetAntennaConfig
```
public StpApi.GetAntennaConfigCommand getGetAntennaConfig()
```
    Specified by:
    
    getGetAntennaConfig in interface StpApi.CommandOrBuilder
  - setGetAntennaConfig
```
public StpApi.Command.Builder setGetAntennaConfig(StpApi.GetAntennaConfigCommand value)
```
  - setGetAntennaConfig
```
public StpApi.Command.Builder setGetAntennaConfig(StpApi.GetAntennaConfigCommand.Builder builderForValue)
```
  - mergeGetAntennaConfig
```
public StpApi.Command.Builder mergeGetAntennaConfig(StpApi.GetAntennaConfigCommand value)
```
  - clearGetAntennaConfig
```
public StpApi.Command.Builder clearGetAntennaConfig()
```
  - getGetAntennaConfigBuilder
```
public StpApi.GetAntennaConfigCommand.Builder getGetAntennaConfigBuilder()
```
  - getGetAntennaConfigOrBuilder
```
public StpApi.GetAntennaConfigCommandOrBuilder getGetAntennaConfigOrBuilder()
```
    Specified by:
    
    getGetAntennaConfigOrBuilder in interface StpApi.CommandOrBuilder
  - hasEngage
```
public boolean hasEngage()
```
    Specified by:
    
    hasEngage in interface StpApi.CommandOrBuilder
  - getEngage
```
public StpApi.EngageCommand getEngage()
```
    Specified by:
    
    getEngage in interface StpApi.CommandOrBuilder
  - setEngage
```
public StpApi.Command.Builder setEngage(StpApi.EngageCommand value)
```
  - setEngage
```
public StpApi.Command.Builder setEngage(StpApi.EngageCommand.Builder builderForValue)
```
  - mergeEngage
```
public StpApi.Command.Builder mergeEngage(StpApi.EngageCommand value)
```
  - clearEngage
```
public StpApi.Command.Builder clearEngage()
```
  - getEngageBuilder
```
public StpApi.EngageCommand.Builder getEngageBuilder()
```
  - getEngageOrBuilder
```
public StpApi.EngageCommandOrBuilder getEngageOrBuilder()
```
    Specified by:
    
    getEngageOrBuilder in interface StpApi.CommandOrBuilder
  - hasDisengage
```
public boolean hasDisengage()
```
    Specified by:
    
    hasDisengage in interface StpApi.CommandOrBuilder
  - getDisengage
```
public StpApi.DisengageCommand getDisengage()
```
    Specified by:
    
    getDisengage in interface StpApi.CommandOrBuilder
  - setDisengage
```
public StpApi.Command.Builder setDisengage(StpApi.DisengageCommand value)
```
  - setDisengage
```
public StpApi.Command.Builder setDisengage(StpApi.DisengageCommand.Builder builderForValue)
```
  - mergeDisengage
```
public StpApi.Command.Builder mergeDisengage(StpApi.DisengageCommand value)
```
  - clearDisengage
```
public StpApi.Command.Builder clearDisengage()
```
  - getDisengageBuilder
```
public StpApi.DisengageCommand.Builder getDisengageBuilder()
```
  - getDisengageOrBuilder
```
public StpApi.DisengageCommandOrBuilder getDisengageOrBuilder()
```
    Specified by:
    
    getDisengageOrBuilder in interface StpApi.CommandOrBuilder
  - hasSetOperationResultGpo
```
public boolean hasSetOperationResultGpo()
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
    
    Specified by:
    
    hasSetOperationResultGpo in interface StpApi.CommandOrBuilder
  - getSetOperationResultGpo
```
public StpApi.SetOperationResultGPOCommand getSetOperationResultGpo()
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
    
    Specified by:
    
    getSetOperationResultGpo in interface StpApi.CommandOrBuilder
  - setSetOperationResultGpo
```
public StpApi.Command.Builder setSetOperationResultGpo(StpApi.SetOperationResultGPOCommand value)
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
  - setSetOperationResultGpo
```
public StpApi.Command.Builder setSetOperationResultGpo(StpApi.SetOperationResultGPOCommand.Builder builderForValue)
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
  - mergeSetOperationResultGpo
```
public StpApi.Command.Builder mergeSetOperationResultGpo(StpApi.SetOperationResultGPOCommand value)
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
  - clearSetOperationResultGpo
```
public StpApi.Command.Builder clearSetOperationResultGpo()
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
  - getSetOperationResultGpoBuilder
```
public StpApi.SetOperationResultGPOCommand.Builder getSetOperationResultGpoBuilder()
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
  - getSetOperationResultGpoOrBuilder
```
public StpApi.SetOperationResultGPOCommandOrBuilder getSetOperationResultGpoOrBuilder()
```
    When the GPOConfig enable_operation_result_gpo is set false, this command lets the client application set the pass/fail GPO based on its own pass/fail conditions.
    
    Specified by:
    
    getSetOperationResultGpoOrBuilder in interface StpApi.CommandOrBuilder
  - hasAddSerializationJob
```
public boolean hasAddSerializationJob()
```
    Specified by:
    
    hasAddSerializationJob in interface StpApi.CommandOrBuilder
  - getAddSerializationJob
```
public StpApi.AddSerializationJobCommand getAddSerializationJob()
```
    Specified by:
    
    getAddSerializationJob in interface StpApi.CommandOrBuilder
  - setAddSerializationJob
```
public StpApi.Command.Builder setAddSerializationJob(StpApi.AddSerializationJobCommand value)
```
  - setAddSerializationJob
```
public StpApi.Command.Builder setAddSerializationJob(StpApi.AddSerializationJobCommand.Builder builderForValue)
```
  - mergeAddSerializationJob
```
public StpApi.Command.Builder mergeAddSerializationJob(StpApi.AddSerializationJobCommand value)
```
  - clearAddSerializationJob
```
public StpApi.Command.Builder clearAddSerializationJob()
```
  - getAddSerializationJobBuilder
```
public StpApi.AddSerializationJobCommand.Builder getAddSerializationJobBuilder()
```
  - getAddSerializationJobOrBuilder
```
public StpApi.AddSerializationJobCommandOrBuilder getAddSerializationJobOrBuilder()
```
    Specified by:
    
    getAddSerializationJobOrBuilder in interface StpApi.CommandOrBuilder
  - hasRemoveSerializationJob
```
public boolean hasRemoveSerializationJob()
```
    Specified by:
    
    hasRemoveSerializationJob in interface StpApi.CommandOrBuilder
  - getRemoveSerializationJob
```
public StpApi.RemoveSerializationJobCommand getRemoveSerializationJob()
```
    Specified by:
    
    getRemoveSerializationJob in interface StpApi.CommandOrBuilder
  - setRemoveSerializationJob
```
public StpApi.Command.Builder setRemoveSerializationJob(StpApi.RemoveSerializationJobCommand value)
```
  - setRemoveSerializationJob
```
public StpApi.Command.Builder setRemoveSerializationJob(StpApi.RemoveSerializationJobCommand.Builder builderForValue)
```
  - mergeRemoveSerializationJob
```
public StpApi.Command.Builder mergeRemoveSerializationJob(StpApi.RemoveSerializationJobCommand value)
```
  - clearRemoveSerializationJob
```
public StpApi.Command.Builder clearRemoveSerializationJob()
```
  - getRemoveSerializationJobBuilder
```
public StpApi.RemoveSerializationJobCommand.Builder getRemoveSerializationJobBuilder()
```
  - getRemoveSerializationJobOrBuilder
```
public StpApi.RemoveSerializationJobCommandOrBuilder getRemoveSerializationJobOrBuilder()
```
    Specified by:
    
    getRemoveSerializationJobOrBuilder in interface StpApi.CommandOrBuilder
  - hasAddTidTableEntries
```
public boolean hasAddTidTableEntries()
```
    Specified by:
    
    hasAddTidTableEntries in interface StpApi.CommandOrBuilder
  - getAddTidTableEntries
```
public StpApi.AddTIDTableEntriesCommand getAddTidTableEntries()
```
    Specified by:
    
    getAddTidTableEntries in interface StpApi.CommandOrBuilder
  - setAddTidTableEntries
```
public StpApi.Command.Builder setAddTidTableEntries(StpApi.AddTIDTableEntriesCommand value)
```
  - setAddTidTableEntries
```
public StpApi.Command.Builder setAddTidTableEntries(StpApi.AddTIDTableEntriesCommand.Builder builderForValue)
```
  - mergeAddTidTableEntries
```
public StpApi.Command.Builder mergeAddTidTableEntries(StpApi.AddTIDTableEntriesCommand value)
```
  - clearAddTidTableEntries
```
public StpApi.Command.Builder clearAddTidTableEntries()
```
  - getAddTidTableEntriesBuilder
```
public StpApi.AddTIDTableEntriesCommand.Builder getAddTidTableEntriesBuilder()
```
  - getAddTidTableEntriesOrBuilder
```
public StpApi.AddTIDTableEntriesCommandOrBuilder getAddTidTableEntriesOrBuilder()
```
    Specified by:
    
    getAddTidTableEntriesOrBuilder in interface StpApi.CommandOrBuilder
  - hasAddOrderedListEntries
```
public boolean hasAddOrderedListEntries()
```
    Specified by:
    
    hasAddOrderedListEntries in interface StpApi.CommandOrBuilder
  - getAddOrderedListEntries
```
public StpApi.AddOrderedListEntriesCommand getAddOrderedListEntries()
```
    Specified by:
    
    getAddOrderedListEntries in interface StpApi.CommandOrBuilder
  - setAddOrderedListEntries
```
public StpApi.Command.Builder setAddOrderedListEntries(StpApi.AddOrderedListEntriesCommand value)
```
  - setAddOrderedListEntries
```
public StpApi.Command.Builder setAddOrderedListEntries(StpApi.AddOrderedListEntriesCommand.Builder builderForValue)
```
  - mergeAddOrderedListEntries
```
public StpApi.Command.Builder mergeAddOrderedListEntries(StpApi.AddOrderedListEntriesCommand value)
```
  - clearAddOrderedListEntries
```
public StpApi.Command.Builder clearAddOrderedListEntries()
```
  - getAddOrderedListEntriesBuilder
```
public StpApi.AddOrderedListEntriesCommand.Builder getAddOrderedListEntriesBuilder()
```
  - getAddOrderedListEntriesOrBuilder
```
public StpApi.AddOrderedListEntriesCommandOrBuilder getAddOrderedListEntriesOrBuilder()
```
    Specified by:
    
    getAddOrderedListEntriesOrBuilder in interface StpApi.CommandOrBuilder
  - hasSetInventoryJob
```
public boolean hasSetInventoryJob()
```
    Specified by:
    
    hasSetInventoryJob in interface StpApi.CommandOrBuilder
  - getSetInventoryJob
```
public StpApi.SetInventoryJobCommand getSetInventoryJob()
```
    Specified by:
    
    getSetInventoryJob in interface StpApi.CommandOrBuilder
  - setSetInventoryJob
```
public StpApi.Command.Builder setSetInventoryJob(StpApi.SetInventoryJobCommand value)
```
  - setSetInventoryJob
```
public StpApi.Command.Builder setSetInventoryJob(StpApi.SetInventoryJobCommand.Builder builderForValue)
```
  - mergeSetInventoryJob
```
public StpApi.Command.Builder mergeSetInventoryJob(StpApi.SetInventoryJobCommand value)
```
  - clearSetInventoryJob
```
public StpApi.Command.Builder clearSetInventoryJob()
```
  - getSetInventoryJobBuilder
```
public StpApi.SetInventoryJobCommand.Builder getSetInventoryJobBuilder()
```
  - getSetInventoryJobOrBuilder
```
public StpApi.SetInventoryJobCommandOrBuilder getSetInventoryJobOrBuilder()
```
    Specified by:
    
    getSetInventoryJobOrBuilder in interface StpApi.CommandOrBuilder
  - hasSetCartonContentsJob
```
public boolean hasSetCartonContentsJob()
```
    Specified by:
    
    hasSetCartonContentsJob in interface StpApi.CommandOrBuilder
  - getSetCartonContentsJob
```
public StpApi.SetCartonContentsJobCommand getSetCartonContentsJob()
```
    Specified by:
    
    getSetCartonContentsJob in interface StpApi.CommandOrBuilder
  - setSetCartonContentsJob
```
public StpApi.Command.Builder setSetCartonContentsJob(StpApi.SetCartonContentsJobCommand value)
```
  - setSetCartonContentsJob
```
public StpApi.Command.Builder setSetCartonContentsJob(StpApi.SetCartonContentsJobCommand.Builder builderForValue)
```
  - mergeSetCartonContentsJob
```
public StpApi.Command.Builder mergeSetCartonContentsJob(StpApi.SetCartonContentsJobCommand value)
```
  - clearSetCartonContentsJob
```
public StpApi.Command.Builder clearSetCartonContentsJob()
```
  - getSetCartonContentsJobBuilder
```
public StpApi.SetCartonContentsJobCommand.Builder getSetCartonContentsJobBuilder()
```
  - getSetCartonContentsJobOrBuilder
```
public StpApi.SetCartonContentsJobCommandOrBuilder getSetCartonContentsJobOrBuilder()
```
    Specified by:
    
    getSetCartonContentsJobOrBuilder in interface StpApi.CommandOrBuilder
  - hasGetOperationData
```
public boolean hasGetOperationData()
```
    Specified by:
    
    hasGetOperationData in interface StpApi.CommandOrBuilder
  - getGetOperationData
```
public StpApi.GetOperationDataCommand getGetOperationData()
```
    Specified by:
    
    getGetOperationData in interface StpApi.CommandOrBuilder
  - setGetOperationData
```
public StpApi.Command.Builder setGetOperationData(StpApi.GetOperationDataCommand value)
```
  - setGetOperationData
```
public StpApi.Command.Builder setGetOperationData(StpApi.GetOperationDataCommand.Builder builderForValue)
```
  - mergeGetOperationData
```
public StpApi.Command.Builder mergeGetOperationData(StpApi.GetOperationDataCommand value)
```
  - clearGetOperationData
```
public StpApi.Command.Builder clearGetOperationData()
```
  - getGetOperationDataBuilder
```
public StpApi.GetOperationDataCommand.Builder getGetOperationDataBuilder()
```
  - getGetOperationDataOrBuilder
```
public StpApi.GetOperationDataCommandOrBuilder getGetOperationDataOrBuilder()
```
    Specified by:
    
    getGetOperationDataOrBuilder in interface StpApi.CommandOrBuilder
  - hasAddLicenseKey
```
public boolean hasAddLicenseKey()
```
    Specified by:
    
    hasAddLicenseKey in interface StpApi.CommandOrBuilder
  - getAddLicenseKey
```
public StpApi.AddLicenseKeyCommand getAddLicenseKey()
```
    Specified by:
    
    getAddLicenseKey in interface StpApi.CommandOrBuilder
  - setAddLicenseKey
```
public StpApi.Command.Builder setAddLicenseKey(StpApi.AddLicenseKeyCommand value)
```
  - setAddLicenseKey
```
public StpApi.Command.Builder setAddLicenseKey(StpApi.AddLicenseKeyCommand.Builder builderForValue)
```
  - mergeAddLicenseKey
```
public StpApi.Command.Builder mergeAddLicenseKey(StpApi.AddLicenseKeyCommand value)
```
  - clearAddLicenseKey
```
public StpApi.Command.Builder clearAddLicenseKey()
```
  - getAddLicenseKeyBuilder
```
public StpApi.AddLicenseKeyCommand.Builder getAddLicenseKeyBuilder()
```
  - getAddLicenseKeyOrBuilder
```
public StpApi.AddLicenseKeyCommandOrBuilder getAddLicenseKeyOrBuilder()
```
    Specified by:
    
    getAddLicenseKeyOrBuilder in interface StpApi.CommandOrBuilder

Class StpApi.Command.Builder

Method Summary

Methods inherited from class com.google.protobuf.GeneratedMessage.Builder

Methods inherited from class com.google.protobuf.AbstractMessage.Builder

Methods inherited from class com.google.protobuf.AbstractMessageLite.Builder

Methods inherited from class java.lang.Object

Methods inherited from interface com.google.protobuf.MessageOrBuilder

Method Detail

getDescriptor

internalGetFieldAccessorTable

clear

clone

getDescriptorForType

getDefaultInstanceForType

build

buildPartial

mergeFrom

mergeFrom

isInitialized

mergeFrom

hasConnect

getConnect

setConnect

setConnect

mergeConnect

clearConnect

getConnectBuilder

getConnectOrBuilder

hasGetVersionsReader

getGetVersionsReader

setGetVersionsReader

setGetVersionsReader

mergeGetVersionsReader

clearGetVersionsReader

getGetVersionsReaderBuilder

getGetVersionsReaderOrBuilder

hasStart

getStart

setStart

setStart

mergeStart

clearStart

getStartBuilder

getStartOrBuilder

hasStop

getStop

setStop

setStop

mergeStop

clearStop

getStopBuilder

getStopOrBuilder

hasGetDeviceState

getGetDeviceState

setGetDeviceState

setGetDeviceState

mergeGetDeviceState

clearGetDeviceState

getGetDeviceStateBuilder

getGetDeviceStateOrBuilder

hasSetDeviceConfig

getSetDeviceConfig

setSetDeviceConfig

setSetDeviceConfig

mergeSetDeviceConfig

clearSetDeviceConfig

getSetDeviceConfigBuilder

getSetDeviceConfigOrBuilder

hasGetDeviceConfig

getGetDeviceConfig

setGetDeviceConfig

setGetDeviceConfig

mergeGetDeviceConfig

clearGetDeviceConfig

getGetDeviceConfigBuilder

getGetDeviceConfigOrBuilder

hasSetAntennaConfig

getSetAntennaConfig

setSetAntennaConfig

setSetAntennaConfig