Voyantic

How to Improve Efficiency of the R&D Team in UHF Tag Design
Published on by

中文版 Chinese version

Being responsible for sales of RFID performance measurement solutions, I’ve had the privilege of meeting with several companies and their design professionals around the world using very different methods for measuring UHF tag performance. Which is the best method then? I’d say it depends on your requirements – for a single basic measurement you may use various methods and even a simple method can be sufficient. However, if you are looking for a way to improve the throughput and efficiency of your R&D team in tag design, the differences in methods are huge. So, where does the efficiency come from?

The simplest method in UHF tag measurement is using an RFID reader to verify if the tag can be read from a certain distance or not – this pass/fail type of method is easy to do and fast for sure, however most of the important characteristics cannot be measured nor verified at all. Another commonly used method based on a set of generic measurement instruments like a signal generator, a network analyzer and a power meter, is more advanced but unfortunately not anymore fast nor easy to use.

As the two methods introduced above are not ideal in the first place, obviously neither of them can be the real solution to provide increased efficiency either – don’t worry, there is another approach available.

Purpose-built RFID Measurement System

In the R&D environment most RFID measurements set high requirements for reliability, accuracy and repeatability of the results and the test method itself. This is the case also in developing new UHF tag designs, thriving to the best possible performance and at the same time balancing various requirements for different parameters. In this kind of environment the key questions are;

  • How quickly can a set of various measurements be performed?
  • Can the measurements be repeated automatically during the design iterations?
  • What are the possibilities in storing, analyzing and sharing the results?
  • What kind of competence is required to perform the measurements?

The ideal solution addressing these requirements is a purpose-built RFID measurement system, providing easy-to-use user interface, high measurement accuracy, compliance with standard RFID protocols and wideband sweep capability.

How to Enhance Efficiency of the R&D Team?

Ease-of-Use

There is inherent ease-of-use in the concept of a purpose-built measurement system, as there is only one tester device including all the necessary accessories and an easy-to-use graphical user interface. A predefined measurement set-up procedure based on reference tag ensures correct system start and correct measurement results.

Ease-of use improves the efficiency of each user regardless of their technical competence. However, the real benefit comes out of the fact that also less experienced persons can easily be trained to perform extensive measurements without having deep RF knowledge.

Graphical User Interface

One System - Several Measurements

A dedicated RFID measurement system includes all the necessary measurement functions presented in a pull-down menu with suggested default settings for each measurement. Wideband sweep measurement performed over a wide frequency range of e.g. 800 – 1000 MHz enables flexible visual presentation of the tag detuning phenomenon on different materials compared with on-air results.

Measurement functions menu

One Measurement – Several Results

One single measurement, like the Threshold Sweep, provides several calculated results (e.g. Transmitted power, Backscattered power, Electrical Field Strength and Theoretical Read Range) that can be viewed simply by selecting the desired result view from the Y-axis pull-down menu.

Results selection menu

Repeatability and Automation

Once the user has selected the function and started the measurement with relevant parameters, the test system provides the results that are stored in the results database with a time stamp and detailed information on all the parameters used in the measurement. Error prone human interaction and handling of the results is avoided by automated calculation and management of the results.

The quality of the measurements can be further ensured by defining and storing a sequence of measurement commands (Scripter) for repeated use. Predefined script together with automatic rotation system eliminates human errors when performing e.g. orientation sensitivity measurements in various positions between 0 and 360 degrees. The example script below defines a sequence of two Threshold measurements and one Backscatter measurement.

Example of a measurement script

Conclusions

A purpose-built RFID measurement system combines high measurement accuracy, versatile measurement capability and ease-of-use – a unique combination that cannot be achieved with traditional methods.

Accordingly, the improvement of the R&D team efficiency is based on:

  • Quick set-up of the system
  • Better visibility to the performance of the tag under test
  • More measurements in the time period available
  • More tests on alternative tag designs in shorter time
  • Avoiding human errors
  • Testing made possible for non-RF specialist
  • Shorter time to market for new tag designs.

If you want to learn in detail how the Voyantic Tagformance UHF Measurement System can improve the efficiency of your organization, please download the Tagformance Catalogue below! In case of questions or comments, send me an email and let’s talk more!

Download the Tagformance Catalogue!

Learn in detail how the Voyantic Tagformance UHF Measurement System can improve the efficiency of your organization!

Download Now →


← Back to the Posts